Thermo-Flo Thermal Dispersion Flow Switch


The general purpose gas flow switch is a great choice for a broad range of relatively clean gases with non-coating characteristics. Media examples include nitrogen and scrubber exhaust fumes. The 1A relay provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The short sensor is intended for use in pipe or ducting from 1/2” to 1-1/2”; the long sensor is applied in 2” and up. The switch set point may be adjusted from 1 to 90 fps. The product is broadly selected for low or no-flow applications.
 
 
     
 
     
 
Flow-Point Compact Relay Flow Controller


The general purpose controller provides a single channel low flow switch with one sensor input. The optional flash alarm brings immediate attention to low flow conditions. Package the controller with any of our liquid or gas flow switches. The AC powered relay controller has a 10A relay, adjustable time delay, LED indicators and NO or NC invert switch. The rugged NEMA 4X enclosure is made of UL approved fire retardant PP with a swivel base for easy conduit alignment.

 
 
     
 
     
 
DataLoop Intrinsically Safe Loop Powered Meter


Offered in intrinsically safe and general purpose configurations, the loop powered panel meter displays engineering units connected in series with one 4-20 mA transmitter. Select the LI25 -2001 meter for hazardous applications with an intrinsically safe level transmitter. Select the LI25-1001 meter for general purpose applications. For field mount installations, order the single or two meter NEMA box.


 
 
     
 
     
 
Smart-Trak Multi-Point Adjustable Fitting


The adjustable multi-point fitting enables users to install and adjust up to four Flowline level switches to any depth along the entire length of track. The fitting is typically applied in atmospheric day tanks, process vessels and small waste sumps. Select the appropriate track length based upon your application tank height and add one sensor car kit for each sensor to be installed on the track. Order the compact junction box for sensor power, relay and conduit termination. The rugged NEMA 4X enclosure is made of fire retardant PP with a swivel base for easy conduit alignment.


 
 
     
 
     
 
Switch-Pak Single-Point Alarm Fitting

The single-point fitting enables users to install a Flowline level switch through the top wall of the tank. Offered in PVC, PP and PVDF materials, the fitting is typically applied in bulk storage tanks, day tanks and waste sumps. Each fitting is built custom to your requirements. Select the appropriate material based upon on your application liquid and specify the A-dimension. For integral wiring termination, add a compact junction box. For installation on open tanks or sumps, add a side mount bracket. For applications with highly corrosive media such as nitric acid, select the PVDF fitting material option. The Kynar® fitting is heat welded and final assembled to your A-dimension. Package the fitting with any of our
PVDF Kynar® or PFA Teflon® sensors. Its level made simple!.