Flow-Captor 412-.1


The flow-captor 412-.1-is a family of compact, metering flow switches with adjustable set-point and analog display. They operate based on the new calorimetric principle. The flow-captor allows to set an exact flow set-point and to measure simultaneously the flow rate up to the lowest conditions.
 
 
     
 
     
 
Vent-Captor Type 3205.30


The vent-captor type 3205.30 is an air flow meter for industrial applications. The small, self-contained vent-captor is completely epoxy resin encapsulated and operates with high accuracy and repeatability even under changing working conditions. The vent-captor can be integrated into measurement and control systems without additional components. The newly developed operating principle for the measurement of air flow, based on the calorimetric principle, provides a wide measurement range over a large quantity. The measurement range is continuously adjustable from 1 to 30 m/s. To achieve the best signal resolution 4 different units are available.
 
 
     
 
     
 
Flow-Captor Type 4204


The flow-captor type 4204, together with the separate electronic unit type 4053.31, monitors flow as well as temperature of oil-based liquids up to a temperature of 100 °C. The non-intrusive flow-captor with stainless steel (WN 1.4305) housing and sensing surface, which can be easily mounted by the stainless steel ¾ “ thread, transmits the pulsed flow signal and the analog temperature signal to the transducer where they are converted into an analog output signal. The flow-captor operates according to the calorimetric principle, which is unsurpassed by other sensing technologies, where the ruggedness and reliability quality of the flow-captor cannot be matched.
 
 
     
 
     
 
Flow-Captor Type 412-.80/.81 M


The flow-captor type 412-.80/.81 M is a family of compact, precise metering flow switches with analog display in a rugged stainless steel housing. They operate based on the calorimetric principle. The flow-captor allows to set an exact flow set-point and will measure simultaneously the flow rate up to the lowest flow conditions.
 
 
     
 
     
 
Flow-Captor Type 412-.1- M


The flow-captor type 412-.1- M is a family of compact, precise metering flow switches with analog display in a rugged stainless steel housing. They operate based on the calorimetric principle. The flow-captor allows to set an exact flow set-point and will measure simultaneously the flow rate up to the lowest flow conditions.
 
 
     
 
     
 
Vent-Captor Type 3302.30


The inline vent-captor type 3302.30 is a compact air flow meter for industrial applications, ideal for small diameters. The measurement of the mass flow bases on the calorimetric principle. The inline vent-captor is completely resin encapsulated, thus rugged, shock and vibration proof.
 
 
     
 
     
 
Cool Guard


 
 
     
 
     
 
Vent-Captor Type 3201


Vent-Captor air flow monitors are solid state switching and monitoring devices for use in industrial air handling applications. vent-captor air flow monitors are self-contained switching devices without anymechanical moving parts, which convert flow conditions into electrical switching signals. vent-captor air flow monitors can be simply installed into any air flow and perform reliably even under the harshest environmental conditions.
 
 
     
 
     
 
Flow-Captor Type 4114.30 / 4115.30


The flow-captor type 4114.30 / 4115.30 is a flow meter for industrial applicationswhich can be installed virtually non-intrusively into any pipe, allowing flow-sensing without obstruction of the pipe diameter. As the housing and sensor surface is of stainless steel (WN 1.4305) this small, compact flow-captor is very resistant to aggressive media.
 
 
     
 
     
 
Metering Flow Switch With Analog Display


The flow-captor 4120 is a unique, precise, metering flow switch with adjustable setpoint for industrial application. For the first time in flow technology it is possible to set an exact flow set-point and to simultaneously measure flow speed in applications where the use of conventional devices is restricted, due to lack of space, or where the price of such devices is not feasible.
 
 
     
 
     
 
Air, Steam. Gas Flow Meter


Use our GFM series flow meter for measuring flow rates of bio-gas, LPG, compressed air, steam (saturated & superheated) in closed pipes. The flow meter is suited for wide range of applications where affordability, reliability and ruggedness are of prime importance.

The INTEGRAL ORIFICE ASSEMBLY is a flow element capable of adapting to DP transmitter to make a compact, complete flow metering transmitting device without the need of separate impulse piping.