Air Hammer


From storage tanks to material producing processes in automatic factory. They require different piping, horozoutal ,conveyor, weighing, arrangement , separate ,coding, life testing equipment dust ,collecting, and main in process automation. Material characteristic (moisture, s.g., size ) and equipment design (shape, stuff ) usually lead to accumulated or even decreasing material delivery flow problems in working flows. Pneumatic vibrator provides the best solution by applied it onto problem position. By using pneumatic vibrator to shake or peel off clog material from applied object or to low down friction between materials to make it move smoothly in automatic production.
 
 
     
 
     
 
Dust Sequnce Controller


The programmable sequential controller is designed specifically for use with pneumatic dust collector systems. It is used to control the solenoid of the diaphragm valve in order to program the pulse jet sequence of the valves. LED lights serve as indication of status of pulse position and timing. Both the pulse jet timing and duration of each pulse jet could be adjusted by the logic circuitry. The controller has 2 independent "ON" and "OFF" methods, the 1st is when the AC power supply is cut off, the controller will shut down. When the AC supply is reconnected, the controller will automatically revert to its initial default settings. The 2nd method is to employ the use of the controller's remote contacts (R,C,A) as the controlling signal.
 
 
     
 
     
 
Dust Valve and Controller


The diaphragm valve is divided by a diaphragm into two chambers which are connected by an air passage which is smaller in diameter than the orifice of the pilot valve. When the orifice opens, the air in the upper chamber is exhausted much faster than air can enter through the air passage. The pressure of upper chamber suddenly drops, the much higher pressure of the lower chamber thus pushes the diaphragm to open the Diaphragm Valve Unit. The abrupt air blast is therefore directed to inflate the filter and shock down the dust clinging. When the orifice closes, the two chambers' pressures become equalised, the diaphragm is pushed down (closed) by the spring force.
 
 
     
 
     
 
Pneumatic Vibrator


From storage tanks to material producing processes in automatic factory. They require different piping, horizontal, conveyor, weighing, arrangement , separate ,coding, life testing equipment, dust collecting, and main in process automation. Material characteristic (moisture, S.G., size D) and equipment design (shape, stuff D) usually lead to accumulated or even decreasing material delivery flow problems in working flows. Pneumatic vibrator provides the best solution by applied it onto problem position. By using pneumatic vibrator to shake or peel off clog material from applied object or to low down friction between materials to make it move smoothly in automatic production.