Auto Manual Station AM 01


Electronet’s Series of AM 01 Digital Auto/manual station is specially designed for various industrial applications. In manual mode the output is adjusted through push buttons available on front fascia and in auto mode the input is transferred with same ratio.In both Auto & Manual Mode the percentage of output is viewed on Digital Display.
 
 
     
 
     
 

Panel Indicator


Silient Features
1. Truly Universal Input
2. ON/OFF control output
3. 4 digit LED 0.8" 7-seg Red LED display
4. User friendly calibration through software
5. The control points are settable through key pad on front facia
6. Cold junction compensation for TC input
7. Open Sensor detection

 
 
     
 
     
 
Process Indicator Controller DPC 100


Electronet's Series DPC-200 are Process Indicator / Controllers specially designed for various industrial applications. These can be used for monitoring and controlling parameters like Temperature, Pressure, Flow, Speed, Level etc. with the help of proper Sensors / Transmitters. The control points are settable through the keypad on front fascia and control output is available at the rare end. Optionally Communication port available on request.
 
 
     
 
     
 
Signal Isolator 1 to 1 Tx 00


Electronet's series TX - 00 are Loop Powered Signal Converter Isolators specially designed for various industrial applications. It can interface all types of inputs like RTD, Thermocouple, Frequency & provide the output as 0 - 20 mA DC / 4 - 20 mA DC . Isolated. The compact design gives elegant astheics and also saves inner space required to in panel to mount the instrument.
 
 
     
 
     
 
Digital Counter Microprocessor Based


The microprocessor based counter is a fast, accurate and user friendly product that can satisfy the user through its multi-function feature. This in turn decreases the need for stock keeping and lowers costs, resulting in increased competitiveness. The counter is suitable in a wide range of application, e.g. batch counter, totalizer, length measurement, positioning control, chronometer, tachometer, flowmeter, etc. User need only to configure the counter according to the required function.
 
 
     
 
     
 
Panel Indicator

Silient Features
1. Truly Universal Input
2. ON/OFF control output
3. 4 digit LED 0.8" 7-seg Red LED display
4. User friendly calibration through software
5. The control points are settable through key pad on front facia
6. Cold junction compensation for TC input
7. Open Sensor detection

 
 
     
 
     
 
Signal Isolaor 1 x 2 Tx 20


Electronet's series TX - 20 are Signal Converter Isolators specially designed for various industrial applications in indsutrial automation for interfacing field signals to PLC & DCS Systems which is now very basic and critical requirement in any industry for total process automation. It can interface all types of analog inputs like RTD, Thermocouple, mV, mA. These isolators can isolate, amplify and convert input signal to high level analog signal & various current rating digital signal.
 
 
     
 
     
 
Signal Isolator Universal Input Tx 20m


Electronet's series TX - 20M are Signal Converter Isolators are unique in it s feature due to use o f state -of-art Microcontroller which facilitates the user to select all types of analog inputs like RTD, Thermocouple, mV, mA. On field and friendly calibration at site to get desired analog output in form of 4 - 20 mADC, 1-5 VDC . The instrument can be easily calibrated at site without any external Calibrating device other than signal simulator.
 
 
     
 
     
 
Multifunction Power Meter


The PF Power Meter utilizes a 16 bit 61.44MHz DSP digital signal converter as it's main processor to produce timely and accurate results. Complemented with 3-phase electrical power A/D switching chip, it is able to sample 6 sets of signals simultaneously (3- phase voltage and 3-phase current) to produce accurate monitoring. Apart from the industry's standard of using switching mode single module A/D converter which produces a time lag in-between sampling, the PF provides digital analysis, display, regulation, output and other functions.
 
 
     
 
     
 
Panel Indicator Microprocessor Type


Modulized design is a concept to adapt different analog input signals by means of changing different signal board (such as temperature, pressure, alternating voltage, electric current.). Also, optional output board could add the analog output signal (isolated). By using advanced digital calibration capability, its analog input/output could be accurate to +/- 1 bit.
 
 
     
 
     
 
Signal Isolator 1 x 4 Tx 40


Electronet's series TX - 40 are signal converter isolators specially designed for various industrial applications. These modules are used to interface all types of analog signals like RTD, Thermocouple, mV, mA, higher voltages, current & digital signals. These isolators can isolate, amplify and convert input signal to high level analog signal & various current rating digital signal into multiple stages upto 4 channels.