Thermal Dispersion Type Flow Switch


The Thermal Flow Switch Monitor is based on the principle of thermal dispersion. A typical configuration uses two Temperature Detectors set within the tip of the sensor. One Temperature Detector is heated a few degrees above the other one. As the process medium flows over the tip of the sensor it disperses some of the heat from the heated Temperature Detector. The delta temperature is a function of flow velocity and converted into electronic signal. The open collector changes state once the set point has been reached.

 
 
     
 
     
 
Microprocessor Temperature Controller


Electronet's Series DPC-200 WP are Process Indicators specially designed for various industrial applications in Hazard area mostly in Chemical and pharmaceutical industries. These can be used for monitoring & controlling parameters like Temperature, Pressure, Flow, Speed, Level etc. with the help of proper Sensors / Transmitters.
 
 
     
 
     
 
Process Indicator Flame Proof DPI-2INCH


Electronet's Series DPI-151 are Process Indicators specially designed for various industrial applications in Chemical and Pharmaceutical Industries in Gaseous and hazardous areas.. These can be used for monitoring parameters like Temperature, Humidity, Pressure, Flow, Speed, Level etc. with the help of proper Sensors / Transmitters.
 
 
     
 
     
 
Temperature Controllers


The 73 series programmable temperature controller is FineTek's most high-end controller. Equipped with a 24 bit analog/ digital converter core processor and with FUZZY and improved PID calculation microprocessor, the controller is capable of fast and accurate performance with reliable results. Double row of 4 digit displays indicates Present Value and Set Value (except PT7310), enables user friendly readings and coupled with 3 button operation, makes operating the controller very convenient.
 
 
     
 
     
 
Three Channel Process Indicator DPC 300


Electronet's Series DPC-300 are Three Channel Process Indicator / Controllers with individual PV displays with builtin memory for peak value data specially designed for various industrial applications. These can be used for monitoring and controlling parameters like Temperature,Humidity, Pressure, Flow, Speed, Level etc. with the help of proper Sensors / Transmitters. The control points are settable through the keypad on front fascia and control output is available at the rare end.
 
 
     
 
     
 
TR Series Temperature Transmitter


1. Input Signal: mV, V, mA, Thermocouple, RTD or Ohm
2. Accuracy: +/- 0.3% F.S. or +/- 1 digit
3. Loop power: 12~32Vdc
4. 4 digit LCD display
5. Temperature range adjustable by PC or Key pad